NEXT GENERATION:
COMPUTER/LAPTOP DOS FORMATTING PROCESSING.
How to Install DOS
Insert
the first installation disk in the CD/DVD disk drive and restart your computer. The first disk is a bootable disk so you should see an
option to hit a key to boot from the disk (the exact key can vary depending on
which computer you have).
1.
Hit the key to boot from the floppy drive. Your computer will abandon the usual boot process and
instead you will see a blue screen with Microsoft DOS setup menu.
2.
Press the
Enter key on your keyboard to continue with the setup process.
3.Select "Configure first hard disk (recommended)"
by hitting the Enter key again.
4.
Read the information on the Caution window. You may want to consider the following options before
continuing to install DOS. Press F3 if you want to back up your files. You will
be exited from the DOS installation process. Hit the Escape key if you want to
return to the previous window to review your choices.
5.
Wait while your system configurations are checked. After configuration check has completed your hard drive
will be formatted using the FAT16 file system. Press the "Y" key on
your keyboard if you want to continue installing DOS. The setup program will
now continue to configure your hard drive and then restart your computer.
6.
Confirm your date/time, country and keyboard layout in the
next window. You can use your cursor keys to
change the selections. If all settings are correct, you can highlight "The
settings are correct" and press Enter.
7.
Install DOS in the default directory by leaving the
directory location unchanged in the next window and just hitting Enter.
8.
Let your computer copy the files from the first installation
disk. A status bar will appear so you can
see the progress.
9.
Replace disk 1 with disk 2 when prompted and hit Enter to
continue. You will see the status bar appear
again.
10.Take out disk 2 and insert disk 3 when the next prompt
window appears and press Enter.
This will allow files to be copied from the third installation disk until all
files have been copied.
11.
Remove the final disk from your CD/DVD drive when you see
the message appear that says "Remove disks from all CD/DVD disk drives." Press Enter after your floppy drive has been emptied.
12.Press
Enter to restart your computer when you get to the window titled "MS-DOS
Setup Complete."
Please Follow Screen Short Step By Step************
THANK YOU
NEXT GENARATION
Supported All Nokia Symbian mobile 
